iss. date material: drawn: checked: customer ref.: c/note finish: drawing no.: third angle projection all dimensions in mm not to scale c s/area: assembly drg: if in doubt - ask mm2 title: drawing number: sht of approved: this drawing and any information or descriptive matter set out hereon are confidential and copyright property of the harwin group and must not be disclosed, loaned, copied or used for manufacturing, tendering or for any other purpose without their written permission. tolerances x. = 1mm x.x = 0.25mm x.xx = 0.10mm x.xxx = 0.01mm angles = 5 unless stated name customer information sheet harwin europe (uk) mis @harwin.co.uk mis @harwin.com tel: 603 893 5376 fax: 603 893 5396 harwin asia mis @harwin.com.sg harwin usa tel: +65 6 779 4909 fax: +65 6 779 3868 tel: 023 9231 4545 fax: 023 9231 4590 ( ) 32.8 ( ) 27.3 Z80-258 sht 2 of 2 2 2 10130 Z80-258 b. m. kent bmk 2c 22.08.08 datamate trio-tek female contact extraction tool notes: 1) this extraction tool has been designed for use with following datamate trio-tek female signal crimp contacts, housing and housing assembly: m80-25300xx = female crimp contact for 24-22 awg wire, supplied reeled m80-25400xx = female crimp contact for 28-26 awg wire, supplied reeled m80-28300xx = female crimp contact for 24-22 awg wire, supplied loose m80-28400xx = female crimp contact for 28-26 awg wire, supplied loose m80-454xx98 = female crimp housing, no jackscrews m80-455xx98 = female crimp housing, hexagonal slotted jackscrews m80-456xx98 = female crimp housing, hexagonal socket jackscrews m80-457xx98 = female crimp housing, reverse fix jackscrews m80-458xx98 = female crimp housing, guide pin with panel mount jackscrews 2) this tool can be used to aid the assembly of contacts into housing. 3) for extraction tool instruction specifications, see instruction sheet is-28, available at http://www.harwin.com/downloads/instructions/ 4) packing = bag stainless steel ra bmk scale 2.5
|